Requirements for testing of smoke detectors vary by country, the common need is for a functional test where smoke, or simulated smoke, is introduced through the vents of the detector to the sensor.
Functional testing is required by all national standards around the world, including BS: 5839, DIN 14675 and NFPA 72. A functional test should be carried out using an appropriate test tool which is designed for purpose and will cause no damage to the detector under test.
There are now two products within the Solo range that allow functional testing of smoke detectors – both of which are approved by leading detector manufacturers:
Solo 365 Smoke Detector Tester
This new method of smoke generation takes the Solo brand to the next level. Solo 365 generates smoke on-demand via non-pressurised smoke cartridges – it’s lighter to use, quicker to test and suitable for more applications.
Solo ES3 Smoke Cartridge
Inserted in the Solo 365 tester, a Solo ES3 smoke cartridge will produce a detector-friendly smoke compatible with the widest range of detectors.
Solo 330 Aerosol Smoke Dispenser
Fundamental to functional smoke checking for many professionals around the world the Solo 330 contains the test aerosol and ensures that it is applied correctly and contained only where required. Used with the access poles it enables safe testing at heights but is equally valued at low level.